18 watt Stout with Reverb and No Switch 1

Back to Library page
Page 1 - Page 2
18 watt Stout with Reverb and Full time Hotswitch
Note that Hoffman boards are not assembled by looking at my builds. I do test builds first and change the designs based on those builds. You assemble Hoffman boards using the documents listed below. The Layout Diagram, Schematic and BOM for this board are on this page
This is the 18 Watt stout reverb project with the Hot Switch mod on full time. There is no relay or switch, the second stage of gain is on all the time. For this project, I used a princeton reverb chassis and cabinet that has been through several different circuit boards over the years. It was the perfect chassis to build an 18 Watt Stout reverb in. See the other 18 Watt Stout with Reverb project on the library page for more info on this design.
Click on the images to see larger images

	-
Inside Views
Click on the images to see larger images

Update 10/03/2007: I added a faceplate to my Reverb Stout The color is purple. The picture on the right is closer to the real color.

The Tube amp Library of information
Click the link above for Tube amp info, Schematics, Board building information, Projects, Mods, Transformer diagrams, Photo's, Sound clips.
There are hundreds of pages of Tube amp information on my library page.

Please visit my Tube Amplifier Forum
Here's the place you can go to ask tube amplifier questions.
You will find a large community of friendly amp builders at the link above.

Check the huge library of Schematics here

Design your own custom Turret Board or Eyelet board

DIY Layout Creator file analyzer program

DIY Layout Creator file library

How to email me

18 watt Stout with Reverb and Full time Hotswitch