| I stock many of the parts used in my Bike lighting projects, on my web store. Here is the link to my web store bike lighting parts page. Click here to go to my web store Click here to go back to the Main Bike lights project page |
Beam shots 1 |
|
| Click on the images for a larger image | |
 |
 |
|
Here's the beam shot line up. The Marwi P7 is a halogen conversion - More info here on this light The DX1 P7 is flashlight conversion with the 1.4 amp/2.8 amp/Clicky switch mod - More info here on this light The Hoffman P7 is a one-off home brew of mine that was too expensive to have made in a machine shop The DX2 P7 is Deal extreme SKU 25149 P7 bike light. - More info here on this light I had not taken actual current measurements on this light yet, so I didn't know the actual current settings for High and Low The 1.4 amp/2.8 amp/Clicky switch mod is explained on this page |
|
| - | |
| Click on the images for a larger image | |
 |
 |
|
The reflectors used in each of the lights. The Hoffman uses reflector #1 The Marwi uses reflector #1 The DX1 uses reflector #2 The DX2 uses reflector #3 Reflector #4 is not used in these beam shots. This is the reflector that came with the DX1 flashlight |
|
| - | |
| Click on the images for a larger image | |
 |
 |
|
Reflector sizes Note that reflectors 1 and 2 in the lights above have the rear threaded area machined off and the hole enlarged for a P7. Reflectors 1 and 2 shown here are new, unmodified reflectors. You can see how the reflectors are machined on this page. |
|
| - | |
 |
|
|
Here's a day time shot of the test area. The stump on top of the hill is 63 feet or 19.2 meters from the camera and the lights You can see the stump in the beam shots below |
|
| Click on the images for a larger image | |
 |
 |
| Marwi P7 running at 2.8 amps | Marwi P7 running at 1.4 amps |
| - | |
| Click on the images for a larger image | |
 |
 |
| Hoffman P7 running at 2.8 amps | Hoffman P7 running at 1.4 amps |
| - | |
| Click on the images for a larger image | |
 |
 |
| DX1 P7 running at 2.8 amps | DX1 P7 running at 1.4 amps |
| - | |
| Click on the images for a larger image | |
 |
 |
| DX2 running at 2.4 amps - Not verified yet | DX2 running on low - Current not yet known |
| - | |
| Click on the images for a larger image | |
 |
 |
|
This is my favorite beam shape, the Marwi conversion It lights up the trail just in front of your tire and then throws out a nice fat bright spot down the trail 25+ feet or so. This gives a nice full range of light when on the trail. |
Just for fun I clicked on all four P7's lights as a last shot. The leaves started smoking so I shut er down. :) |
| - | |
| Back to Bike lights page | |
| - | |
Enter My Tube Amp Parts Store Here
Mobile users Enter My Tube Amp Parts Store Here
The Tube amp Library of information
Click the link above for Tube amp info, Schematics, Board building information, Projects, Mods, Transformer diagrams, Photo's, Sound clips.
There are hundreds of pages of Tube amp information on my library page.
Please visit my Tube Amplifier Forum
Here's the place you can go to ask tube amplifier questions.
You will find a large community of friendly amp builders at the link above.
Check the huge library of Schematics here
Design your own custom Turret Board or Eyelet board
DIY Layout Creator file analyzer program
DIY Layout Creator file library
How to email me
|
MEMBER OF PROJECT HONEY POT Spam Harvester Protection Network provided by Unspam |