LED Bike Lights 34

Another P7 - DX flashlight conversion
Click on the images for a larger image

This is DX SKU 15946 flashlight shell. There are no electronics inside, it is sold as an empty shell.
-
Click on the images for a larger image

Here's a DX picture of all the pieces	I removed all the internal threads on the tail cap and the body. The tail cap was lathed down so that it fits inside the body.
-
-
Click on the images for a larger image

This is what it looks like when the tail cap is slid inside the body
-
Click on the images for a larger image

I ended up removing the fins so I could have a nice flat place for the mounting ring. After I did this, I realized that it would be much better to not remove the fins, but move the mounting ring forward on the light body.
-
-
If I do another one of these conversions, I plan on changing the mounting ring position.	Here is where I removed the fins
-
Click on the images for a larger image

The P7 and Hi-Lo boards are inside the tail cap assembly	The cord exits through a small grommet
-
Click on the images for a larger image

Here's the P7 conversion mounted to a Marwi handle bar mount. The glow in the dark clicky switch has 3 clicks. Click one is 1.4 amps Click two is 2.8 amps Click three is off
-
Back to Bike lights page
-

The Tube amp Library of information
Click the link above for Tube amp info, Schematics, Board building information, Projects, Mods, Transformer diagrams, Photo's, Sound clips.
There are hundreds of pages of Tube amp information on my library page.

Please visit my Tube Amplifier Forum
Here's the place you can go to ask tube amplifier questions.
You will find a large community of friendly amp builders at the link above.

Check the huge library of Schematics here

Design your own custom Turret Board or Eyelet board

DIY Layout Creator file analyzer program

DIY Layout Creator file library

How to email me

Another P7 - DX flashlight conversion