EL34's CNC Stuff - Wood signs |
|
| Back to main CNC page | |
| - | |
| Click on the images to see a larger image | |
 |
 |
|
Had more Bible Thumpers show up at the house the other day so I made this sign. I also get guys selling meat out of the back of pickup trucks. Would you buy meat from some guy off the back of truck? Hopefully the sign does the trick. |
This is a 2 part pine box. The top fits over the bottom. They were both cut from a yellow pine 2x4. |
| - | |
| Click on the images to see a larger image | |
 |
 |
|
This is a box made out of aromatic cedar. The type of nice smelling cedar you find in closets to keep away insects. I glued together several layers of cedar and cut the box sides as one piece on the CNC. I clamped the outside edges and then profiled the inside walls of the box first. After the inside was cut, I was then able to clamp inside the box and then profile the outside of the box and not have any clamps in the way. The bottom of the box was glued on last. The box smells awesome and so does my shop after I cut this cedar box. |
|
| - | |
| Click on the images to see a larger image | |
 |
 |
| Pine version | Oak version |
| This is a small multi compartment box just cut out of a single block of wood. It's pretty simple, but a cool little box. I could also engrave the front panel with something, that would be a nice touch. | |
| - | |
| Click on the images to see a larger image | |
| - | |
| Click on the images to see a larger image | |
 |
 |
| These test engraving pieces are a drawing that my girlfriend and I did in a CAD program. It's a cool little drawing so I decided to test some engravings in different scrap materials I had laying around the shop. |
House number sign. Cut about .125 deep, then the surface was painted black. After the paint dried, I ran the sign through a planer to remove the top surface of black paint. |
| - | |
| Click on the images to see a larger image | ||
 |
 |
 |
| Etched in smoked Plexiglas | Etched in glass with a diamond bit | Etched in poplar |
| Here's the Jolly Roger N character from the Wingdings font set in windows. | ||
| - | ||
| Click on the images to see a larger image | ||
 |
 |
 |
| Here's Roger installed in my porch lamp | Here's Roger with the lamp turned on |
This deep engraving of my company logo did not come out all that clean. I will play with the logo image and then give it another go to test some deep engravings.
I imported a bitmap image into Cambam using the heightmap generator function in Cambam.
|
| - | ||
Enter My Tube Amp Parts Store Here
Mobile users Enter My Tube Amp Parts Store Here
The Tube amp Library of information
Click the link above for Tube amp info, Schematics, Board building information, Projects, Mods, Transformer diagrams, Photo's, Sound clips.
There are hundreds of pages of Tube amp information on my library page.
Please visit my Tube Amplifier Forum
Here's the place you can go to ask tube amplifier questions.
You will find a large community of friendly amp builders at the link above.
Check the huge library of Schematics here
Design your own custom Turret Board or Eyelet board
DIY Layout Creator file analyzer program
DIY Layout Creator file library
How to email me
|
MEMBER OF PROJECT HONEY POT Spam Harvester Protection Network provided by Unspam |