EL34's CNC Stuff - New CNC machine 3 |
|
| Back to main CNC page | |
| - | |
|
02/04/2008 - Took the machine to be welded 02/06/2008 - I added the top to the frame and made an oak workspace for the top. The machine comes alive |
|
| - | |
| Click on the images to see a larger image | |
 |
 |
| The melamine top is attached to the frame rails. The oak work area is attached to the top. It's alive and working. I have the old tool mounted to the new machine until I make a new tool holder. | New motor speed control |
| - | |
| Click on the images to see a larger image | |
 |
 |
|
Tool mount idea #1 for the new machine. The red lines are where bolts will be. The two pieces above will sit in a 1/8" groove on a 1/2" think piece of 6061 aluminum that will bolt to my Z axis. |
New RZ10 Rotozip sitting in tool holder mock up. |
| - | |
| Click on the images to see a larger image | |
 |
 |
| Frame welded - The corner gussets and corners are welded in place | |
| - | |
| Click on the images to see a larger image | |
 |
- |
| Frame welded - The corner gussets and corners are welded in place- | |
| - | |
Enter My Tube Amp Parts Store Here
Mobile users Enter My Tube Amp Parts Store Here
The Tube amp Library of information
Click the link above for Tube amp info, Schematics, Board building information, Projects, Mods, Transformer diagrams, Photo's, Sound clips.
There are hundreds of pages of Tube amp information on my library page.
Please visit my Tube Amplifier Forum
Here's the place you can go to ask tube amplifier questions.
You will find a large community of friendly amp builders at the link above.
Check the huge library of Schematics here
Design your own custom Turret Board or Eyelet board
DIY Layout Creator file analyzer program
DIY Layout Creator file library
How to email me
|
MEMBER OF PROJECT HONEY POT Spam Harvester Protection Network provided by Unspam |