EL34's CNC Stuff - New CNC machine 2 |
|
| Back to main CNC page | |
| - | |
| 01/08/2008 - Got the top and bottom parts of the frame cut. I cut three bearing block locations in each end piece so I can switch from a single screw to two screws if needed. I also cut a plate that bolts to the Y axis actuator so I can bolt the Z axis actuator to a solid one pieces backing. The old oak machine is chugging along and cutting the aluminum just fine so far. | |
| Click on the images to see a larger image | |
 |
 - |
| Motor mount area | - |
| 01/16/2008 - I purchased a cool motor mount that sets the motor back 2 inches. It has a cutout on the side so you can get to the coupler screws. I machined it so that my bearing block fit down inside the motor mount. | |
| - | |
| Click on the images to see a larger image | |
 |
 |
|
01/05/2008 - Everything is just clamped together with wood working clamps so I could get an idea how it will look. Still have to cut the top and bottom frame pieces where the motor and screws mount and a few cross bracing pieces here and there. |
|
| - | |
| Click on the images to see a larger image | |
 |
 |
| Cut out Parts | 01/05/2008 - Cutting out the new machine parts on the OLE Oak machine. |
| - | |
Enter My Tube Amp Parts Store Here
Mobile users Enter My Tube Amp Parts Store Here
The Tube amp Library of information
Click the link above for Tube amp info, Schematics, Board building information, Projects, Mods, Transformer diagrams, Photo's, Sound clips.
There are hundreds of pages of Tube amp information on my library page.
Please visit my Tube Amplifier Forum
Here's the place you can go to ask tube amplifier questions.
You will find a large community of friendly amp builders at the link above.
Check the huge library of Schematics here
Design your own custom Turret Board or Eyelet board
DIY Layout Creator file analyzer program
DIY Layout Creator file library
How to email me
|
MEMBER OF PROJECT HONEY POT Spam Harvester Protection Network provided by Unspam |