Parts list #2 for Marwi SSC P7 conversion |
|
This is a parts list for the dual 1400ma board type drivers that I currently build Note that I do not show the top copper circuit board in this list I may sell this board at a later date, but not right now. |
| Click on the image for a larger image |
 |
|
Parts List for Marwi to SSC P7 conversions A - Marwi old style light body B - Marwi SSC P7 heat sink with 2 mounting screws C - 35mm machined reflector D - 34.8mm glass lens E - Rubber boot for Judco switch F - Judco SPDT switch G - 5/16" grommet H - SSC P7 LED I - Two 1400ma current limiter boards J - One set of Anderson PowerPole connectors K - One Foot each Black and Red Teflon wire (You only need a couple inches of each color. You will have some extra for your next project) L - Three feet of Red/Black 18 gauge Zip Wire Not shown in picture A short piece of 22ga solid core to connect the boards together A small piece of 1/4" diameter heat shrink for the power wire You may also need a Marwi Helmet or Handlebar mount and the nylon Marwi mounting kit. This list does not include batteries or chargers. |
Enter My Tube Amp Parts Store Here
Mobile users Enter My Tube Amp Parts Store Here
The Tube amp Library of information
Click the link above for Tube amp info, Schematics, Board building information, Projects, Mods, Transformer diagrams, Photo's, Sound clips.
There are hundreds of pages of Tube amp information on my library page.
Please visit my Tube Amplifier Forum
Here's the place you can go to ask tube amplifier questions.
You will find a large community of friendly amp builders at the link above.
Check the huge library of Schematics here
Design your own custom Turret Board or Eyelet board
DIY Layout Creator file analyzer program
DIY Layout Creator file library
How to email me
|
MEMBER OF PROJECT HONEY POT Spam Harvester Protection Network provided by Unspam |