Marwi bike light mounts |
|
| - | |
|
Note that the offset mounts shown on this page are no longer available. I bought every one I could find and sold them all. This page has info on how to adapt your Chinese lights to use the Marwi mounts The Marwi adapters and the Marwi Helmet and Handlebar mounts are located here in my web store |
|
| - | |
| Click on the images for a larger image | |
 |
 |
|
I love the Marwi bike light mounts and have used them for many years. Features I like: The handlebar mount has two removable plastic spacer/adapters for regular 25mm handle bars or large size 31mm handle bars. The handle bar mount has a cam lock quick release just like a bike skewer. It has a threaded rod that you can turn to adjust the size, and then there is a cam, like a skewer to lock down it down to the bars. The part that you mount to your light slides onto the handlebar mount and snaps into place. You just push on a small lever to release the light form the bike and leave the mount on the handlebar. The top part of the mount has two rails that are slides for the light mount. This part also swivels side to side and has small ratchets that keep it locked into position. You can grab the light while riding and twist it side to side to align your headlight beam. You can turn and lock the slide rails around at other angles. |
|
| - | |
| Click on the images for a larger image | |
 |
|
|
The Marwi Helmet mount is made of a very tough, but flexible plastic. It bends to the shape of your helmet very nicely. It has thick rubber piece on the under side to keep it from moving once you lock it down to your helmet. The mount slides off so you can remove your light, and then you just leave the flat mount on the helmet. It has a very low profile when the light is removed. |
|
| - | |
| Click on the images for a larger image | |
|
 |
| This image shows how you can swivel the top and point the light where you want it | Here's a shot of both mounts with the slide on mount attached |
| - | |
| Click on the images for a larger image | |
|
|
|
This is the slide on mount that comes with both Marwi mounts. There is a 1/4" sized hole through the uprights where you mount your light. The small washers snap into place in the uprights The washers have a raised lock washer pattern on the other side that grips the light |
|
| - | |
| Click on the images for a larger image | |
 |
 |
|
These are the 3 slide mounts found on Marwi lights. A is the male slide mount used on the Headshots. You bolt this mount to a Headshot and then you can slide a Marwi light on and off the Headshot. This mount is no longer available B is the standard straight mount that you bolt onto a light This is the mount that comes with the Marwi Helmet and bar mounts C is the offset mount that you bolt onto a light This mount is no longer available The offset mounts come and go, supplies are always limited. If you see them on my web store, better get them while you can. |
|
| - | |
| Click on the images for a larger image | |
|
|
|
Helmet mount shot with Marwi P7 LED |
Helmet mount shot with Marwi P7 LED |
| - | |
| Click on the images for a larger image | |
|
|
|
Helmet mount shot with Magic Shine P7 LED |
Helmet mount shot with Magic Shine P7 LED |
| - | |
| Click on the images for a larger image | |
|
|
|
Cockpit shot of dual Marwi P7 LED's |
Dual Marwi P7 LED's |
| - | |
| Click on the images for a larger image | |
|
|
|
Side shot of Marwi P7 and Magic Shine P7 |
Marwi P7 LED and Magic Shine P7 LED |
| - | |
| Click on the images for a larger image | |
|
|
| - | |
Enter My Tube Amp Parts Store Here
Mobile users Enter My Tube Amp Parts Store Here
The Tube amp Library of information
Click the link above for Tube amp info, Schematics, Board building information, Projects, Mods, Transformer diagrams, Photo's, Sound clips.
There are hundreds of pages of Tube amp information on my library page.
Please visit my Tube Amplifier Forum
Here's the place you can go to ask tube amplifier questions.
You will find a large community of friendly amp builders at the link above.
Check the huge library of Schematics here
Design your own custom Turret Board or Eyelet board
DIY Layout Creator file analyzer program
DIY Layout Creator file library
How to email me
|
MEMBER OF PROJECT HONEY POT Spam Harvester Protection Network provided by Unspam |