Marwi switch housing for bike handlebars
|
|
| - | |
| Click on the images for a larger image | |
 |
|
|
The two piece Marwi switch housing snaps together. There are guide pins on the lower half that insert into holes on the upper half. The back side of the housing is curved so it fits on a round surface, like a Bike handlebar The big hole that the switch goes through is 11.2mm in diameter The Velcro strap is approximately 6 inches long There is a slot in the body that the Velcro strap runs through. The Marwi switch housing and the switches that fit this housing can be found on my switches page here. |
|
| - | |
| Click on the images for a larger image | |
 |
|
|
Here you can see a close up of the two half's of each switch housing The internal section where the switch body fits is 14mm wide x 20mm tall |
|
| - | |
| Click on the images for a larger image | |
 |
|
|
The switch housing assembled with a short switch and a short switch boot The switch and the switch boot do not come with the switch housing I stock those items on my switches page. See the links on this page |
|
| - | |
| Click on the images for a larger image | |
 |
|
|
A close up shot of the switch assembly strapped down to a piece of 1 inch diameter tubing. The rubber switch boot seals everything nicely |
|
| - | |
| Click on the images for a larger image | |
 |
|
|
This is how the switch housings look with a tall switch and tall switch boot and a short switch and short switch boot |
|
| - | |
| Click on the images for a larger image | |
 |
|
|
This image shows the two types of switch bodies that fit the Marwi housing One switch is taller than the other. Each switch also has it's own switch boot, a tall boot and a short boot. I stock several types of switches that fit this housing SPST tall, short and several NC and NO momentary sitches The Marwi switch housing and the switches that fit this housing can be found on my switches page here. |
|
| - | |
| Click on the images for a larger image | |
 |
|
|
Here's a shot of the switch housing mounted on one of my bikes the round wire you see in the picture is mini shielded cale I stock this cable on my wire and cable page |
|
| - | |
| Click on the images for a larger image | |
 |
|
|
Here's a shot of the switch housing mounted on one of my bikes |
|
| - | |
 |
 |
|
This is my double Marwi XML rig with two Marwi thumb switches I can turn on each light individually with it's own thumb switch |
|
| - | |
Enter My Tube Amp Parts Store Here
Mobile users Enter My Tube Amp Parts Store Here
The Tube amp Library of information
Click the link above for Tube amp info, Schematics, Board building information, Projects, Mods, Transformer diagrams, Photo's, Sound clips.
There are hundreds of pages of Tube amp information on my library page.
Please visit my Tube Amplifier Forum
Here's the place you can go to ask tube amplifier questions.
You will find a large community of friendly amp builders at the link above.
Check the huge library of Schematics here
Design your own custom Turret Board or Eyelet board
DIY Layout Creator file analyzer program
DIY Layout Creator file library
How to email me
|
MEMBER OF PROJECT HONEY POT Spam Harvester Protection Network provided by Unspam |