Old and newer style Marwi halogen light bodies |
|
| - | |
|
Note that I sell these NOS halogen lights and bodies on my web store The typical battery packs that came with these lights originally were 6 volt Ni-Cad or Ni-Mh battery packs 5 x 1.2 volt batteries in series = 6 volts Note that I do not stock the batteries for these lights. I have used many of the Sanyo HR-4/3FAU Ni-Mh batteries with these lights. Here's a link showing what the Sanyo's look like |
|
 |
 |
| Side by side shots showing the difference between the old and new style bodies | |
| The older style Marwi body | |
| - | |
|
This is the older style bell shaped Marwi Halogen light. The bodies had more of a bell shape than the newer style Marwi Halogen light bodies The SPST On/Off switch is located at the back of the plastic housing protected by a rubber switch boot |
|
| Click on the images for a larger image | |
 |
 |
| One MR11 6 volt halogen bulb, a SPST Judco switch, a Trailtech type connector |
I have seen these light bodies in several colors |
| - | |
| Click on the images for a larger image | |
 |
 |
|
These lights also came as a double set with an external handlebar switch One light has a rear switch and the other light uses the external switch |
|
| - | |
| The newer style Marwi body | |
| - | |
|
This is the later style bullet shaped Marwi Halogen light. The bodies had more of a Bullet shape than the earlier Marwi Halogen light bodies The SPST On/Off switch is located on top of the rear housing under a sealed rubber cap. |
|
| Click on the images for a larger image | |
 |
 |
| MR11 6 volt halogen bulb | I have seen these bodies in several colors including red |
| - | |
| Click on the images for a larger image | |
 |
 |
| All of the Marwi mounts on my LED catalog store page fit these lights. | On/Off switch cap and Trailtech type connector |
| - | |
| Click on the images for a larger image | |
 |
 |
|
These lights also came as a double set with an external handlebar switch One light has a rubber switch cap and the other light uses the external switch The light that uses the external switch has a hard plastic cap in place of a rubber switch cap |
|
| - | |
Enter My Tube Amp Parts Store Here
Mobile users Enter My Tube Amp Parts Store Here
The Tube amp Library of information
Click the link above for Tube amp info, Schematics, Board building information, Projects, Mods, Transformer diagrams, Photo's, Sound clips.
There are hundreds of pages of Tube amp information on my library page.
Please visit my Tube Amplifier Forum
Here's the place you can go to ask tube amplifier questions.
You will find a large community of friendly amp builders at the link above.
Check the huge library of Schematics here
Design your own custom Turret Board or Eyelet board
DIY Layout Creator file analyzer program
DIY Layout Creator file library
How to email me
|
MEMBER OF PROJECT HONEY POT Spam Harvester Protection Network provided by Unspam |