d O Lx 0Q  L/ \ \Unexpected error (%d).u An unexpected error has occurred. The cause of this error has not been taken into account by the software. A\The connected instrument is\not an arbitrary waveform\generator. The connected instrument is not an arbitrary waveform generator. Select another instrument by choosing the Connect item in the Instrument menu. \ \Sending waveform.\ \Error opening sequence file.X The selected file can not be opened. Check if it is in use by another program. $\ \Error reading sequence\from file. An error has occurred while reading the sequence from the file. In case the selected disk drive is a floppy, check if the floppy is still properly placed in the disk drive. Otherwise, try the action again. \ \Error writing sequence file. An error has occurred while saving the sequence data to the specified file. Check if there is enough free disk space for saving the sequence to file. 2\Too many entries in the\sequence.\Maximum is 100.@ The maximum amount of entries in the sequence list is 100. %\ \Sequence is not saved.\ \Save now? The sequence has not been saved yet. Activate the Yes button, when sequence must be saved. Activate the No button, when sequence must not be saved. Activate Cancel to return to the Sequence tool. E\No sequence to send.\ \Add a waveform entry or open\a sequence file. No sequence to send. A sequence must be opened from file or created by adding new entries first. Open a file by selecting the Open menu item in the File menu or add an entry by selecting Add in the Sequence menu. ,\ \The selected file is not a\sequence file. The selected file is not a sequence file. The software can only use sequence files of its own format. Select another file. "\ \File already exists.\Overwrite? The filename that is chosen as destination file for saving already exists on the disk. Activating the Yes button will overwrite the existing file with new data. Activating the No button will make it possible to select another filename. ^\ Error writing temporary file.\ This file is internally used\ by AnyWave software.\ Free more disk space to\ overcome this error.7 When creating a sequence, a temporary file must be created. This file can not be written. There may not be enough free disk space left on the current disk drive. There may also not be enough disk space on another drive, because the "TMP" DOS environment variable has been set. This is normally done in AUTOEXEC.BAT. Eg. when the statement SET TMP=C:\TMP is present in AUTOEXEC.BAT, drive C: may not have enough disk space left. Change the value of the TMP environment variable (refer to the DOS manual), or free disk space on the specified drive. Furthermore the number of open files may be too high. The number of files can be increased by changing the line with "FILES=" in the CONFIG.SYS file. Eg. change FILES=10 into FILES=20. Exit this software to overcome the cause of the problem. C\ \Error opening temporary file\that is internally used\by AnyWave.8 When creating a sequence, a temporary file must be created. This file can not be opened. There may not be enough free disk space left on the current disk drive. There may also not be enough disk space on another drive, because the "TMP" DOS environment variable has been set. This is normally done in AUTOEXEC.BAT. Eg. when the statement SET TMP=C:\TMP is present in AUTOEXEC.BAT, drive C: may not have enough disk space left. Change the value of the TMP environment variable (refer to the DOS manual), or free disk space on the specified drive. Furthermore the number of open files may be too high. The number of files can be increased by changing the line with "FILES=" in the CONFIG.SYS file. Eg. change FILES=10 into FILES=20. Exit this software to overcome the cause of the problem. \ \No filename specified. Specify a filename in which is the waveform that needs to become part of the sequence is present. Activate the Select Filename button to choose a file. \ \No waveform specified. Specify the title of the waveform that needs to become part of the sequence. Activate the Select Waveform button to choose a file. 4\ \Index count too large.\Specify a value below 100. The index count is used to differentiate waveforms that have the same title. It is not allowed to have more than 100 waveforms with the same title. Specify a value between 0 and 100. \ \Repeat count too large. The repeat count specifies the amount of repetitions of the corresponding waveform. The maximum value depends on the connected instrument. For the PM5150 the value must be below 1048575. \ \Waveform not found. The specified waveform can not be found in the given filename. Select another waveform by entering another waveform name or activate the Select Waveform button. \ \Waveform '%s%s' not found.y The specified waveform can not be found. Select that waveform and choose the Change item in the Sequence menu. \ \File not found. The specified file does not exist. Select another filename by entering another name or activate the Select Filename button. +\ \No waveform found in\the specified file. No waveform can not be found in the given filename. Select another filename by entering another name or activate the Select Filename button. Y^\ Configured instrument is not an\ arbitrary waveform generator with\ a Sequence Option.V A sequence consists of a number of waveforms after each other. Each waveform can be repeated a number of times. In this way a long arbitrary waveform can be generated. To be able to generate such a sequence, an instrument needs to be equipped with a Sequence Option. The connected instrument does not have that option installed.